Tips To Paint a Fiberglass Boat

Fiberglass boats are new with a colorful gel coat and not paint. The gelcoats eventually fade and can not be cleaned or waxed. Painting fiberglass is the only way to give the boat a new look.

Preparing and painting fiberglass is not like painting metal or aluminum. Special steps must be taken in to consideration and best yacht painting Service to get the best possible paint job done without damaging the fiberglass. Learn how to paint a fiberglass boat and give your boat a new look.

Image Source – Google

Step 1

Remove or tape all parts or materials that will not be painted, such as baffles, fans, nameplates, and registration numbers. Use a clean cloth to wipe the boat with a solvent to remove the wax. This eliminates any varnish residue that has been applied to the surface of the boat.

Step 2

Look for scratches, bumps or gouges on the surface of the boat that need repair. Fill these areas with an epoxy putty and let it dry. Sand the sealant with a 60 grit sandpaper and a double sander. Sand again with 80 grit sandpaper to smooth out scratches from 60 grit paper.

Step 3

Apply a thin coat of primer to the surface of the boat with a roller or brush. Cover the entire area of the boat that will be painted. The primer will not look great at this point, but as long as the entire surface is covered with a thin layer, it will look great after applying the paint. Begin painting within 2 hours of applying the primer to keep the primer fresh.

Paint the boat with the urethane paint in 2 parts. Apply the first coat of paint with a paint roller. Immediately following this operation with another thin layer applied with a foam brush to smooth the tracks left by the roller.

Leave a Reply